|
The incredible IRSP Fireflex is an obvious choice for situations where increased risk of
fire is a major concern.
Fireflex provides a substantial safety barrier between the source of the fire and any
precious or dangerously flammable stock.
On demand there is FIREFLEX-R available – radiance safe and according to intrnational standards.
IRSP Fireflex doors are custom made to fit any opening.
FIREFLEX shutters are fitted with safety brakes coupled with a suitable drive ratio so as not to activate
when the door is closing in controlled descent.
All IRSP’s doors have been throughly tested in a variety of real life situations and accredited.
IRSP is a name synonymous with the highest quality door products.
Shutter curtain:
Manufactured from pre-galvanised material, designed to provide a hollow section
panel with fibre infill. Each section is 100mm profile with twin ribbed face for rigidity.
The curtain, when assembled is held in position with purposely designed end fittings, which act as a
curtain alignment system. The bottom panel of the shutter is terminated with a galvanised steel plate
with horizontal and vertical slots
Barrel
Manufactured from seamless mild steel tube to BS4760 Grade 50C. Maximum barrel
deflection measured at 1:400, fitted with precisionmachined BDMS axles to BS970 EN33 with end fitted plate wheel.
Main support bracket
Main support plates for the barrel and motor unit manufactured from mild steel.
Support plates to BS 4360/43A with perimeter welded angles and structure support angles
Operation
The door is arranged for an electric motor unit with fusible link or solenoid release unit complete
with built on starter.
Fireflex is an insulated curtain which is able to keep its unexposed face surface radiation below 20kW/m²
when applied to the time temperature curve of BS 476 Part 20: 1987
Sound reduction
The Fireflex roller shutter has a weighted sound reduction value of 18Db (BS 5821 Part 3: 1984)
FIREFLEX S: Fire protection shutter
Test:BRE Test report number 220737
Assessment:Assessment report number CC 224355
Inetgrity:240 minutes
FIREFLEX S - Technical information
CE Mark (Declaration of conformity)
Type Approval (Chiltern Dynamics - UKAS approved test laboratory)
Testing Laboratory (BRE Testing – UKAS approved test laboratory)
Compliant with Part 1 BS EN 13241-1: 2003
Mechanical Aspects EN12604, Safety in use of power operated doors.
Side guide protection EN 12604: 2000 4.5.1 and EN 12453: 2000 5.1.1.3
Protection Against crushing, shearing or drawing in
Electrical Safety Depending on the use
Water Tightness EN 12489
Resistance to Wind Load EN 12444
Fire Resistance test B.S.476 : Part 22 : 1987
Integrity 241 minutes (4 hours)
Air permeability EN 12427
Gravity and self-closing EN 12453 - 5.1.1.5
Anti fall back device EN 12453 - 5.1.1.5
Installation Instructions EN 12635: 2002 4.1.1.1
Durability of Mechanical Performance EN 12635: 2002 4.1.1.1
FIREFLEX R: Radyasyon kalkanlı Yangın Sarmal Kapı
Test:LPC TE88517 / BRE 220737
Inetgrity: 240 minutes
Irradiance: 27 kW/m2
Maximum Surface Area: 50 m2
FIREFLEX R - Technical information
CE Mark (Declaration of conformity)
Type Approval (Chiltern Dynamics - UKAS approved test laboratory)
Mechanical Aspects EN12604, Safety in use of power operated doors
Side guide protection EN 12604: 2000 4.5.1 and EN 12453: 2000 5.1.1.3
Protection Against crushing, shearing or drawing in
Electrical Safety Depending on the use
Water Tightness EN 12489
Resistance to Wind Load EN 12444
Thermal resistance EN 12428
Air permeability EN 12427
Opto Safety Edge Self Monitoring EN 12453 - 5.1.1.5
Anti fall back device EN 12453 - 5.1.1.5
Installation Instructions EN 12635: 2002 4.1.1.1
Durability of Mechanical Performance EN 12635: 2002 4.1.1.1
Fire Test BS476: Part 22: 1987
|
e-mail
