Standard equipment
Options
Standard equipment
Options
Novoferm dock shelters with collapsible design protect against draughts, rain, and wind. They ensure perfect sealing between lorry and building and protect against energy loss and possible damage to the goods. The built in rain water channel deflects water from the roof to the outside of the shelter.
Product benefits
Sealing pads offer protection from draughts, rain and wind. They provide perfect sealing between
lorry and building and protect against energy loss and possible damage to the cargo.
Product benefits
NovoSeal S220
The NovoSeal S401 enables a continuous building front due to being directly inserted into the
recess of the building. As a result, the appearance of your system is definitely improved.
Product benefits
Niche seal
Product benefits
3 mm PVC tarpaulins with good restoring force create perfect seal integrity
Installation in existing niche
As part of the integrated loading solution, NovoSeal S620 is automatically actuated. After
actuating the door OPEN switch, the air bags of the NovoSeal S620 are first inflated, and then the
door opens automatically. At the end of the loading process, the dock leveller is first driven into
resting position with the AutoDock function, then the door is closed, a possibly connected dock
light is switched off, the NovoSeal S620 is vented, and an exterior traffic light switches to green.
This automatic sequence increases efficiency, saves energy costs, and prevents possible damage
caused by removing the lorry too early while the air bags are still inflated.
Product benefits
Novoferm leaf blowers with spring-back feature changeable temperature conditions, rain
and provides protection against wind. A perfect seal between the loader and the building
It helps to eliminate energy loss and possible damage to cargo. Built-in rain drain diverts rainwater sideways.
Product advantages
Due to the strong increase in Internet trading, the need for vans in city centres is rising fast. In
most cases, these parcels must be handled with great care. At the same time, the multitude of
different vans with varied contours and different door hinges pose a special sealing problem. The
NovoSeal VS250 can optimally fulfil such requirements.
Product benefits
The NovoDock L530 is optimised for the enhanced market requirements and combines the benefits of various systems. The hydraulic dock leveller with telescopic lip is particularly robust and enables efficient loading thanks to modern controller technology. The new NovoSmart Drive system provides the easiest and most efficient operation with the least energy requirement.
Product Benefits
The NovoDock L530i XL without threshold provides a precise loading. With the integrated Novo iVision TA Control Panel, the loading ramps are comfortable and safe to use.
With its unique design, the NovoDock L730i hydraulic loading ramp guarantees optimum isolation for loading areas at all times. With the movable cover, the air flow is prevented during loading and provides thermal insulation.
Product benefits
The next generation of the loading ramps. The standard in terms of safety, efficiency and connectivity.
Product benefits
The StepDock was developed for a lorry to dock with closed rear doors. The rear doors are thus only opened when the lorry is already in the correct loading position, not already open a few meters in front of the loading bay. This ensures that the cold chain is not interrupted or additional maneuvering operations can also be omitted. In addition, this system is perfect for preventing theft and for customs purposes.
The NovoDock L550i is specially designed for heavier loads. The hydraulic loading ramp with telescopic lip is particularly robust and enables efficient loading thanks to modern controller technology. Like all Green Solution products, the NovoDock L550i contributes to cost savings thanks to CO2 reduction technology.
Product benefits
The NovoDock VL6020 is designed for flexible user requirements. In addition to the advantages of a regular telescopic loading ramp with state-of-the-art controls and hydraulics, the structure also offers the possibility to load and unload small carriers.
Hydraulic loading ramps with hinged lip have been established as basic version in the loading technology. The NovoDock L320 redefines this standard. It combines many years of experience and a robust steel construction with new design and the most modern control technology. Naturally, only materials are used that comply with current environmental standards. The hydraulic loading ramps with hinged lip have established themselves among loading systems
as the basic version. The NovoDock L320e redefines a new standard. It is designed for perfect transportation and available in two versions.
Product benefits
Hydraulic loading ramps with hinged lip have been established as basic version in the loading technology. The NovoDock L320R is designed as a specific replacement solution. It combines many years of experience and a robust steel construction with new design and the most modern control technology. Naturally, only materials are used that comply with current environmental standards.
Product benefits
The NovoDock L340 combines a solid steel construction with the latest control technology for efficient loading. The materials used in all GreenPlus packaged products meet current environmental standards and reduce CO2 emissions thanks to their extremely low energy consumption.
With the integrated i-Vision-HAR1-control, the NovoDock L350i is user friendly and safe to operate. Like all Green Solution products, the NovoDock L350i also caters for CO2 reduction and operating cost savings through optimised energy requirements. The stable steel construction remains unchanged. NCI provides a decisive competitive edge over all other loading ramps with hinged lip that are available on the market.
Product benefits
The steel frame allows the NovoDock P1320 and P1330i to be installed in front of the building and provides a foundation for a loading area. NovoDock P1320 and P1330i, like all Green Solution products, also saves costs thanks to the reduction in CO2. The new NCI comes into play with the NovoDock P1330i and is optionally available for the NovoDock P1320.
Product benefits
The H50 presents you with a variable concept for the use of telescopic lip and hinged lip dock levellers. The load house offers additional storage space within the building.
Product benefits
Traffic lights signal to both the driver outside and the loading personnel inside that the loading area is ready for approaching. While traffic lights are preferred as yellow-green single signal transmitters, they are often used as red-green two-signal transmitters. Standard bulbs and high quality LED lamps are used in signal transmitters in two versions. The luminous power of the LED lamps provides good awareness even in the sunny conditions. The functions of the traffic lights
are adapted for the users.
Wheel chocks keep vehicles stable in loading areas. A standard chock only helps to a limited extent. The electronic wheel chock only works when it rests on the wheel and the correct application is ensured thanks to the position indicating sensor in the chock. This application helps the chock and the driver to connect with the traffic lights. In this way, the driver will be informed of the situation in the loading area, and it is extremely convenient.
The routing barrier helps us immensely to prevent possible damage. It is mostly made of galvanized steel pipes and is ground-mounted in front of the loading ramp to the left and right of the vehicle. In this way, the vehicle is directed to the correct position and damages caused by docking errors are prevented.
A vehicle that is being loaded or unloaded inevitably creates a dark area in the loading area. Therefore, where the vehicle and the ramp meet, a fast and safe material flow becomes difficult. Considering these possibilities, Novoferm’s loading lights are a suitable solution. They can be mounted directly to the door sill without effort and thanks to its flexible arms, every corner of the vehicle and the loading area is illuminated.
FGI loading technologies are carried out with various devices and equipment used during the transportation and storage of goods and goods. Loading technologies ensure fast, efficient and safe transportation.
Various technologies are designed for a specific use or type of material to be transported. Examples include forklifts used to lift and move pallets, or conveyor belts designed to handle heavy loads.
Loading technologies have many advantages. First of all, it is of great importance in terms of worker health and safety. On the other hand, it is of vital importance for the transportation and storage of goods and goods. Businesses use efficient loading technologies and increase their productivity. Manual load handling increases the risk of injury to workers. Loading technologies provide a safer working environment in terms of worker health and safety. In this way, the risk of injury to workers is minimized. Loading technologies should be chosen according to the needs of businesses. In this way, businesses can work with high efficiency and less risk of worker injury. While increasing the efficiency of businesses, it also provides workplace safety. Loading technologies are an important investment for businesses because of their advantages such as flexibility, storage capacity, worker productivity, operating costs and less damage.
These loading technologies include various devices and equipment used in the transportation and storage of goods and goods. Different loading technologies are used in different industries.
The most commonly used
Forklifts: Forklifts are loading technologies used to lift and move pallets. Forklifts are widely used in the warehousing, manufacturing, transportation and construction industries.
Conveyor belts: Conveyor belts are another loading technology used in the transport of materials. Conveyor belts are widely used in production lines, storage facilities and handling operations.
Lifting equipment: Lifting equipment is loading technology designed for the handling of heavy loads. Lifting equipment includes different types such as cranes, crane trucks and gantry cranes.
Pallet trucks: Pallet trucks are loading technologies used for transporting palletized loads. Pallets are used for smaller jobs instead of forklifts. It is widely used in storage facilities.
Conveyor belts: Conveyor belts are another loading technology used in the transport of materials. Conveyor belts are widely used in factories, storage facilities and airports.
Containers: Containers are loading technologies used in transportation operations. Containers ensure safe transportation of materials and speed up the transportation process.
Pallets: Pallets are loading technologies used in the transportation and storage of materials. Pallets are used by forklift trucks, pallet trucks and other loading devices.
These loading technologies are used for different purposes in different industries and are selected in accordance with the needs of businesses.
Maintenance of loading technologies is very important. Regular maintenance of these solutions extends the life of the devices. This maintenance helps detect problems in its operation and ensures a safe working environment in the workplace. Maintaining products is vital to reducing costs and maintaining a safe workplace environment. Regular maintenance and repair are among the measures. On the other hand, use in accordance with the operating instructions, training and spare parts stocks are also measures for maintenance.
You can follow us closely.
Social Media